SOLAR EPC · DESIGN · INSTALL · MAINTAIN
Intelligent solar energy systems
Recon Energy is a turnkey solar EPC contractor engineering grid-tied, hybrid and off-grid systems across industry, housing and agriculture. We size every array against a measured load curve, build with tier-1 modules and hybrid inverters, and stay on the asset for its full life through monitoring and scheduled maintenance.
Solar PV
Rooftop & Ground-Mount Arrays
From 3 kWp to multi-megawatt, sized against your measured daytime load rather than your roof area.
Storage
Battery Energy Storage
LFP storage for peak shaving, load shifting or true backup autonomy, transferring in under 20 milliseconds.
Agriculture
Solar Pumping & Irrigation
VFD-driven tube wells and pump sets from 5 HP to 75 HP, hardened for dust and seasonal duty cycles.
Monitoring
O&M & Asset Performance
String-level telemetry, thermography and scheduled cleaning under a 48-hour response contract.
OUR FOOTPRINT
Eighty-six megawatts, and every one still on our dashboard.
Recon Energy has commissioned more than 1,240 systems across three customer segments. Every asset we build stays on our monitoring platform, which is how we hold a 99.1% twelve-month fleet uptime and catch underperforming strings before an owner notices the dip.
Where we work
Installation within a 250 km radius. O&M contracts nationwide.
- Industrial corridor — 41 MW
- Metro & suburban — 18 MW
- Agricultural belt — 14 MW
- Logistics & warehousing — 9 MW
- Battery storage deployed — 6.4 MWh
OUR CORE SEGMENTS
Three very different roofs. One engineering standard.
A cement plant, a family home and an irrigation farm each need a different system architecture, but all three get the same load study, the same string design discipline and the same after-sales cover.
Commercial & Industrial
Energy is one of the largest controllable line items in any manufacturing operation, and it is almost always paid at the worst possible rate: daytime, at peak tariff, with demand charges layered on top. Recon Energy designs rooftop and ground-mount arrays sized to a facility measured daytime load, so generation lands exactly when consumption does. Our C&I focus covers textiles, cement, chemicals, steel, cold chain and FMCG, typically achieving 60 to 90 percent daytime offset.
Homes & Residential
Most households want two things from solar: a smaller bill and the lights staying on. Those are different systems. A straight grid-tied array cuts the bill but shuts down in an outage; a hybrid inverter paired with LFP storage keeps selected circuits live and transfers over fast enough that computers do not reboot. We size for whichever matters to you and install in a single working day with warranty-backed waterproofed mounting.
Agriculture & Farms
Irrigation is the single heaviest energy load on most farms, and it runs precisely when the sun is highest, which makes it close to an ideal solar application. Recon Energy builds VFD-driven solar pumping for tube wells and irrigation sets from 5 HP to 75 HP, alongside cold storage and dairy chilling. Structures are hot-dip galvanised and dust-hardened, and systems are sized to the seasonal duty cycle rather than the nameplate motor rating.
CUSTOMER WHO TRUST US
SUCCESS STORY
What the numbers look like a year later
Northvale Textiles — 2.4 MWp spinning unit
Northvale ran three shifts with the heaviest draw between 9am and 6pm, and had been quoted twice on roof area alone. Recon Energy pulled twelve months of half-hourly consumption data before proposing a size, then built a 2.4 MWp bifacial array across four production sheds with export control at the point of common coupling.
Grid draw fell 71% in the first full quarter. Twelve months on, measured generation is tracking 4% above the P50 model we published in the proposal.
-
Measured, not estimated
Twelve months of half-hourly load data drove the sizing, not roof area. -
Tracking above model
Actual generation is 4% ahead of the P50 figure quoted at proposal stage.
Recent work, notes and site reports
Commissioning
Arcadia Logistics hub goes live at 1.1 MWp
Warehouse roof plus solar carports over the loading yard, with EV charge points fed directly from the array.
Field note
Why soiling costs more than shading in dry season
Dust and bird soiling can take 8 to 20 percent off output. What our thermography surveys keep finding.
Company
Three years without a lost-time incident
Height certification, harness discipline and DC isolation procedure are non-optional on every Recon Energy site.
GET IN TOUCH
Talk to an engineer, not a call centre
Send one recent electricity bill and a rough roof size. You will have a fully engineered proposal — array layout, yield model and payback — within three working days.
Service desk
O&M & maintenance
24/7 emergency line for contract clients. 48-hour on-site response SLA.
Quotes & enquiries
An engineer replies within one working day, Monday to Saturday.